Getting better at production

everything about recording techniques, software, hardware etc...

Moderators: greatmutah, GuitarBilly

Post Reply
User avatar
Ostinato Rubato
Crystal Lettucer
Posts: 35812
Joined: Fri Jan 18, 2013 1:14 pm
Location: Fruitville, TX

Getting better at production

Post by Ostinato Rubato »

Over the last week or so I've been spending my spare music time on really striving for better drum programming and production quality. I'm trying to not become contented with drum loops that are close enough but trying to really nail the feel and accents, fixing offbeat feels or swing feels where they don't belong, and balance the velocities on the various drum parts throughout the song to match the dynamic and arrangement of the piece.

I also figured out how to route specific drum sounds from the main VST track to other channels for side chain processing. Right now I have kick and toms to their own bus, snare to it's own bus, and brass and room & overhead mic to it's own bus, with a parallel "dry master" bus that contains all drum paths unaffected. On each side chain bus I'm applying processing in different ways to support the type of drum sound the bus controls, and blending those various buses with the dry master to find the right balance between raw sampled sounds and compressed/processed sounds.

Throughout the process I've learned a lot of things. Moving forward I will take these things into new projects with quicker workflow and precision. :D
EBMM Stingray Tobacco and Tort
Marshall 2555X Jubilee
Marshall 2536 2x12
CS Deja Vibe mkii > SupaTrem Jr. > Xotic Wah > OCD v2.0 > Fulldrive 2 mkii > TB Jailed Pitchblack > (Alter Ego x4)
User avatar
BroSlinger
Crystal Lettucer
Posts: 15809
Joined: Sat Jan 19, 2013 10:51 pm

Re: Getting better at production

Post by BroSlinger »

cool
POWERFUL MIDCUT CONTROL
User avatar
Tortuga
Crystal Lettucer
Posts: 17174
Joined: Sat Jan 19, 2013 11:29 am
Location: Slow and steady, bruh

Re: Getting better at production

Post by Tortuga »

So, can I get you to do some "how-to" vids since Jer won't comply?

:D

Dude - we gotta get together so's I can leach some skillz. Would watch anytime :thu:
Co-founder of the Jet Setters 2.0 (Jet ★ City Lounge Redux)

Gear
  • CEOwLP (Sig T), Carvin DC135, Westone Spectrum SX (guitar) & GT (bass), Squier strat
  • '66 Bassman, '61 Magnatone, Mark III, 1960AX, homebrew 2x12 (C90 / EVM12L Thiele), HX Stomp, JCA50H
  • PLX GABion, SD-1, TS9, Crybaby, MXR108, Algal clone, Carbon Copy deluxe

DIY

Ostinato Rubato wrote:"That's the second boomery bro on this forum I've helped seduce to the greenside." :evil:

"Slow and steady gets to **** again eventually" :fap:
User avatar
Ostinato Rubato
Crystal Lettucer
Posts: 35812
Joined: Fri Jan 18, 2013 1:14 pm
Location: Fruitville, TX

Re: Getting better at production

Post by Ostinato Rubato »

GRIMESPACE wrote:So, can I get you to do some "how-to" vids since Jer won't comply?

:D

Dude - we gotta get together so's I can leach some skillz. Would watch anytime :thu:


Come down! We can totally schedule it. Bring my half panel! :D

(i know you got a lot going on right now)
EBMM Stingray Tobacco and Tort
Marshall 2555X Jubilee
Marshall 2536 2x12
CS Deja Vibe mkii > SupaTrem Jr. > Xotic Wah > OCD v2.0 > Fulldrive 2 mkii > TB Jailed Pitchblack > (Alter Ego x4)
User avatar
Tortuga
Crystal Lettucer
Posts: 17174
Joined: Sat Jan 19, 2013 11:29 am
Location: Slow and steady, bruh

Re: Getting better at production

Post by Tortuga »

Dude... I plugged into the boogie last night for the first time in ages... I looked over at the Marshall and my pedalboard, which haven't been plugged in since the MapFest back in March :cry:

The half panel WILL make it to you before you sell the 2x12, I swear :D
Co-founder of the Jet Setters 2.0 (Jet ★ City Lounge Redux)

Gear
  • CEOwLP (Sig T), Carvin DC135, Westone Spectrum SX (guitar) & GT (bass), Squier strat
  • '66 Bassman, '61 Magnatone, Mark III, 1960AX, homebrew 2x12 (C90 / EVM12L Thiele), HX Stomp, JCA50H
  • PLX GABion, SD-1, TS9, Crybaby, MXR108, Algal clone, Carbon Copy deluxe

DIY

Ostinato Rubato wrote:"That's the second boomery bro on this forum I've helped seduce to the greenside." :evil:

"Slow and steady gets to **** again eventually" :fap:
User avatar
Ostinato Rubato
Crystal Lettucer
Posts: 35812
Joined: Fri Jan 18, 2013 1:14 pm
Location: Fruitville, TX

Re: Getting better at production

Post by Ostinato Rubato »

:lol:

..... I'm selling it this weekend.... :whistle:
EBMM Stingray Tobacco and Tort
Marshall 2555X Jubilee
Marshall 2536 2x12
CS Deja Vibe mkii > SupaTrem Jr. > Xotic Wah > OCD v2.0 > Fulldrive 2 mkii > TB Jailed Pitchblack > (Alter Ego x4)
User avatar
Tortuga
Crystal Lettucer
Posts: 17174
Joined: Sat Jan 19, 2013 11:29 am
Location: Slow and steady, bruh

Re: Getting better at production

Post by Tortuga »

SERIOUSLY?
Co-founder of the Jet Setters 2.0 (Jet ★ City Lounge Redux)

Gear
  • CEOwLP (Sig T), Carvin DC135, Westone Spectrum SX (guitar) & GT (bass), Squier strat
  • '66 Bassman, '61 Magnatone, Mark III, 1960AX, homebrew 2x12 (C90 / EVM12L Thiele), HX Stomp, JCA50H
  • PLX GABion, SD-1, TS9, Crybaby, MXR108, Algal clone, Carbon Copy deluxe

DIY

Ostinato Rubato wrote:"That's the second boomery bro on this forum I've helped seduce to the greenside." :evil:

"Slow and steady gets to **** again eventually" :fap:
User avatar
Ostinato Rubato
Crystal Lettucer
Posts: 35812
Joined: Fri Jan 18, 2013 1:14 pm
Location: Fruitville, TX

Re: Getting better at production

Post by Ostinato Rubato »

yeah, so you need to ship it overnight... :D
EBMM Stingray Tobacco and Tort
Marshall 2555X Jubilee
Marshall 2536 2x12
CS Deja Vibe mkii > SupaTrem Jr. > Xotic Wah > OCD v2.0 > Fulldrive 2 mkii > TB Jailed Pitchblack > (Alter Ego x4)
User avatar
Tortuga
Crystal Lettucer
Posts: 17174
Joined: Sat Jan 19, 2013 11:29 am
Location: Slow and steady, bruh

Re: Getting better at production

Post by Tortuga »

Oh shiiiiii..... :facepalm:

....so sorry, man

....you know I'll make it up to ya on the flipside :x
Co-founder of the Jet Setters 2.0 (Jet ★ City Lounge Redux)

Gear
  • CEOwLP (Sig T), Carvin DC135, Westone Spectrum SX (guitar) & GT (bass), Squier strat
  • '66 Bassman, '61 Magnatone, Mark III, 1960AX, homebrew 2x12 (C90 / EVM12L Thiele), HX Stomp, JCA50H
  • PLX GABion, SD-1, TS9, Crybaby, MXR108, Algal clone, Carbon Copy deluxe

DIY

Ostinato Rubato wrote:"That's the second boomery bro on this forum I've helped seduce to the greenside." :evil:

"Slow and steady gets to **** again eventually" :fap:
User avatar
Ostinato Rubato
Crystal Lettucer
Posts: 35812
Joined: Fri Jan 18, 2013 1:14 pm
Location: Fruitville, TX

Re: Getting better at production

Post by Ostinato Rubato »

I'm joking dude. You said you would get it to me before I sold it so I was going along with that premise... anyway :lol:

That cab is going nowhere. It works really well with the Jube. Except that half back would put it juuuust in the right spot :cop:
EBMM Stingray Tobacco and Tort
Marshall 2555X Jubilee
Marshall 2536 2x12
CS Deja Vibe mkii > SupaTrem Jr. > Xotic Wah > OCD v2.0 > Fulldrive 2 mkii > TB Jailed Pitchblack > (Alter Ego x4)
User avatar
Tortuga
Crystal Lettucer
Posts: 17174
Joined: Sat Jan 19, 2013 11:29 am
Location: Slow and steady, bruh

Re: Getting better at production

Post by Tortuga »

:sigh: I'm so gullible :lol:

Does it work better than the Randall cab?
Co-founder of the Jet Setters 2.0 (Jet ★ City Lounge Redux)

Gear
  • CEOwLP (Sig T), Carvin DC135, Westone Spectrum SX (guitar) & GT (bass), Squier strat
  • '66 Bassman, '61 Magnatone, Mark III, 1960AX, homebrew 2x12 (C90 / EVM12L Thiele), HX Stomp, JCA50H
  • PLX GABion, SD-1, TS9, Crybaby, MXR108, Algal clone, Carbon Copy deluxe

DIY

Ostinato Rubato wrote:"That's the second boomery bro on this forum I've helped seduce to the greenside." :evil:

"Slow and steady gets to **** again eventually" :fap:
User avatar
Ostinato Rubato
Crystal Lettucer
Posts: 35812
Joined: Fri Jan 18, 2013 1:14 pm
Location: Fruitville, TX

Re: Getting better at production

Post by Ostinato Rubato »

Not really. Same basic tone cause same speaker but the Randall is a bigger more massive overall sound. That's great in a big room but it sucks in a smaller room. The 2x12 gets to the point of a little speaker breakup. Just a hair. And it's at the right volume for when the amp's power section starts to fatten up. The half back would do good things.
EBMM Stingray Tobacco and Tort
Marshall 2555X Jubilee
Marshall 2536 2x12
CS Deja Vibe mkii > SupaTrem Jr. > Xotic Wah > OCD v2.0 > Fulldrive 2 mkii > TB Jailed Pitchblack > (Alter Ego x4)
User avatar
Tortuga
Crystal Lettucer
Posts: 17174
Joined: Sat Jan 19, 2013 11:29 am
Location: Slow and steady, bruh

Re: Getting better at production

Post by Tortuga »

MR RUBATO wrote:The half back will do good things.

Fixed :hi5:
Co-founder of the Jet Setters 2.0 (Jet ★ City Lounge Redux)

Gear
  • CEOwLP (Sig T), Carvin DC135, Westone Spectrum SX (guitar) & GT (bass), Squier strat
  • '66 Bassman, '61 Magnatone, Mark III, 1960AX, homebrew 2x12 (C90 / EVM12L Thiele), HX Stomp, JCA50H
  • PLX GABion, SD-1, TS9, Crybaby, MXR108, Algal clone, Carbon Copy deluxe

DIY

Ostinato Rubato wrote:"That's the second boomery bro on this forum I've helped seduce to the greenside." :evil:

"Slow and steady gets to **** again eventually" :fap:
User avatar
fretless
Crystal Lettucer
Posts: 26940
Joined: Fri Jan 18, 2013 5:15 am
Location: Why am I here, and for how long…

Re: Getting better at production

Post by fretless »

Yeah Thank Christ , on a side note I was jamming with Formal Archer last week and I played the kit with my bare hands , it was so fucking Bonham . \m/\m/
“Our virtues and our failings are inseparable, like force and matter. When they separate, man is no more”
― Nikola Tesla

“I cannot be arsed with this right now”
― MISTER NOBODY™

"Stand up for what you believe in even if you are standing alone"
― Sophie Scholl
shep
Hall of Fame Member
Posts: 218
Joined: Sun Aug 17, 2014 1:31 pm

Re: Getting better at production

Post by shep »

sound examples?
vst plugin used?

:hmm:
Post Reply