How would you go about getting your headstock painted?
Moderators: greatmutah, GuitarBilly
-
- Hall of Fame Member
- Posts: 7891
- Joined: Tue Apr 02, 2013 5:51 pm
- Location: Long Island, NY
How would you go about getting your headstock painted?
I don't know shit about finishing and painting and any of that but it bothers me that my strat head stock isn't matching the body. It's like my favorite thing. How would one go about getting it done and maintain the decals, if possible?
Re: How would you go about getting your headstock painted?
What color strat?
Colonel, Fryette Deathsquad
Guitars:
Endres Offset
Endres Offset Les Paul
Endres Telebird
2005 Gibson Les Paul Standard Faded
1978 Greco ES335
Balaguer Goliath Bass
Amplification:
VHT/Fryette Pittbull 50/CL
Marshall JCM900 2500
Vox AC30
Ashdown MAG420
Guitars:
Endres Offset
Endres Offset Les Paul
Endres Telebird
2005 Gibson Les Paul Standard Faded
1978 Greco ES335
Balaguer Goliath Bass
Amplification:
VHT/Fryette Pittbull 50/CL
Marshall JCM900 2500
Vox AC30
Ashdown MAG420
- Tortuga
- Crystal Lettucer
- Posts: 17174
- Joined: Sat Jan 19, 2013 11:29 am
- Location: Slow and steady, bruh
Re: How would you go about getting your headstock painted?
Sandpaper, masking tape, rattle cans, decal(s) 

Co-founder of the Jet Setters 2.0 (Jet ★ City Lounge Redux)
Gear
DIY
Gear
- CEOwLP (Sig T), Carvin DC135, Westone Spectrum SX (guitar) & GT (bass), Squier strat
- '66 Bassman, '61 Magnatone, Mark III, 1960AX, homebrew 2x12 (C90 / EVM12L Thiele), HX Stomp, JCA50H
- PLX GABion, SD-1, TS9, Crybaby, MXR108, Algal clone, Carbon Copy deluxe
DIY
- New workshop - Teh GRIMESHOP™!
- Bassman overhaul - G-MAN
- Home studio - GRIMESPACE Sound Lab!
Ostinato Rubato wrote:"That's the second boomery bro on this forum I've helped seduce to the greenside."
"Slow and steady gets to **** again eventually"
Re: How would you go about getting your headstock painted?
GRIMESPACE wrote:Sandpaper, masking tape, rattle cans, decal(s)
Probably the cheapest solution. Also the easiest to do poorly.
Colonel, Fryette Deathsquad
Guitars:
Endres Offset
Endres Offset Les Paul
Endres Telebird
2005 Gibson Les Paul Standard Faded
1978 Greco ES335
Balaguer Goliath Bass
Amplification:
VHT/Fryette Pittbull 50/CL
Marshall JCM900 2500
Vox AC30
Ashdown MAG420
Guitars:
Endres Offset
Endres Offset Les Paul
Endres Telebird
2005 Gibson Les Paul Standard Faded
1978 Greco ES335
Balaguer Goliath Bass
Amplification:
VHT/Fryette Pittbull 50/CL
Marshall JCM900 2500
Vox AC30
Ashdown MAG420
-
- Hall of Fame Member
- Posts: 7891
- Joined: Tue Apr 02, 2013 5:51 pm
- Location: Long Island, NY
Re: How would you go about getting your headstock painted?
Sage green. Kinda metallic. I don't want to do it myself. Who would you bring it to?
Re: How would you go about getting your headstock painted?
RyanDistortion wrote:Sage green. Kinda metallic. I don't want to do it myself. Who would you bring it to?
Find a local Luthier that can show you examples of their finish work. Asked specifically to see a painted headstock, masking a headstock is really hard to do nicely.
Then see if they can match the color.
Anyone who does guitar refinishing should have no problem doing the finish and putting new decals on.
Colonel, Fryette Deathsquad
Guitars:
Endres Offset
Endres Offset Les Paul
Endres Telebird
2005 Gibson Les Paul Standard Faded
1978 Greco ES335
Balaguer Goliath Bass
Amplification:
VHT/Fryette Pittbull 50/CL
Marshall JCM900 2500
Vox AC30
Ashdown MAG420
Guitars:
Endres Offset
Endres Offset Les Paul
Endres Telebird
2005 Gibson Les Paul Standard Faded
1978 Greco ES335
Balaguer Goliath Bass
Amplification:
VHT/Fryette Pittbull 50/CL
Marshall JCM900 2500
Vox AC30
Ashdown MAG420
-
- Hall of Fame Member
- Posts: 7891
- Joined: Tue Apr 02, 2013 5:51 pm
- Location: Long Island, NY
Re: How would you go about getting your headstock painted?
Nice one. I'll start looking.
-
- clipless
- Posts: 20317
- Joined: Sat Jan 19, 2013 10:06 am
- Location: 20 miles outside of Philly
Re: How would you go about getting your headstock painted?
And if they are good - they can clear over the decal, making it so smooth, you can't even tell it is a decal.
- fretless
- Crystal Lettucer
- Posts: 26940
- Joined: Fri Jan 18, 2013 5:15 am
- Location: Why am I here, and for how long…
Re: How would you go about getting your headstock painted?
it's tough to match paint , it's always best to shoot the parts all together with the same mix of paint . My go to guy for fine finish work is Pat Wilkins http://www.wilkinsguitars.com/ , and then there is that Nobody guy he is pretty good too 

“Our virtues and our failings are inseparable, like force and matter. When they separate, man is no more”
― Nikola Tesla
“I cannot be arsed with this right now”
― MISTER NOBODY™
"Stand up for what you believe in even if you are standing alone"
― Sophie Scholl
― Nikola Tesla
“I cannot be arsed with this right now”
― MISTER NOBODY™
"Stand up for what you believe in even if you are standing alone"
― Sophie Scholl
- Tortuga
- Crystal Lettucer
- Posts: 17174
- Joined: Sat Jan 19, 2013 11:29 am
- Location: Slow and steady, bruh
Re: How would you go about getting your headstock painted?
That's why contrasting color is best.
Co-founder of the Jet Setters 2.0 (Jet ★ City Lounge Redux)
Gear
DIY
Gear
- CEOwLP (Sig T), Carvin DC135, Westone Spectrum SX (guitar) & GT (bass), Squier strat
- '66 Bassman, '61 Magnatone, Mark III, 1960AX, homebrew 2x12 (C90 / EVM12L Thiele), HX Stomp, JCA50H
- PLX GABion, SD-1, TS9, Crybaby, MXR108, Algal clone, Carbon Copy deluxe
DIY
- New workshop - Teh GRIMESHOP™!
- Bassman overhaul - G-MAN
- Home studio - GRIMESPACE Sound Lab!
Ostinato Rubato wrote:"That's the second boomery bro on this forum I've helped seduce to the greenside."
"Slow and steady gets to **** again eventually"