Page 1 of 1
need help figuring out some mig 100u mods
Posted: Sun Dec 21, 2014 7:59 pm
by dxjxrose
Im not super schematic savvy but am very good with an iron and electronics in general. I have already add some gain to the first stage and added a depth knob. I need some more gain think zakk wylde type gain.. . I use a modded sd1 to boost with also need to tighten up the lows some any help would be great
http://tonefinder.com/index.php?section=id&value=13432Thats a clip of where im at
Re: need help figuring out some mig 100u mods
Posted: Mon Dec 22, 2014 5:55 pm
by Zozobra
Can you post a schematic with your mods included?
Re: need help figuring out some mig 100u mods
Posted: Mon Dec 22, 2014 8:24 pm
by dxjxrose
Thats the issue there isnt one to be found for the mig 100u and ita different than both the 100h and plain 100
Re: need help figuring out some mig 100u mods
Posted: Wed Dec 24, 2014 11:32 am
by Zozobra
I would guess that the topology is the same so try tracing the circuit, making note of the differences.
Re: need help figuring out some mig 100u mods
Posted: Wed Dec 24, 2014 8:11 pm
by dxjxrose
The tone stack is in a diff place is the main dif