Page 1 of 2
New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 3:08 pm
by JerEvil
I had gotten my first Splawn Creamback loaded 2x12 in November and had ordered a second one back in December. Celestion was on backorder with the Creambacks and then Namm hit so there was a bit of a delay in getting my second cab. It showed up yesterday so that was awesome. I got the amp on Monday. This is my first time even playing a Dual Rec so I was a bit nervous.
Verdict ... loving it so far. Anyway, here's a few pics.



Any suggestions on dialing in tones? This shipped with 6L6's.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 5:23 pm
by Hellaboogie
nice rig, I so want two 2x12s
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 5:36 pm
by Tommy Eisen
Needs el34s stat, trust me.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 5:39 pm
by ZEEGLER
I got mine a few months back, but I admittedly haven't spent all that much time messing with the controls. I guess I got a great sound right off the bat, and dialed it in a little, and left good enough alone for now. I will say this, I like the orange channel the best.
I have it set on "spongy", tube rectifier, and the orange channel set on "vintage". Presence, Master, Bass, and Mid are all hovering around noon, gain at about 2 o'clock, and Treble at 1 o'clock. Of course, this is going through a Peavey Butcher 4x12 cab with G12K85s, so it's going to sound totally different through those 2x12s.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 5:40 pm
by LES-ZOMBIE
i love it
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 5:41 pm
by ZEEGLER
Tommy Eisen wrote:Needs el34s stat, trust me.
I gotta try this. Can I just throw any matched set in, or do I have to buy a set of Mesa tubes that are spec'd for the Rectifier?
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 6:07 pm
by Tommy Eisen
ZEEGLER wrote:Tommy Eisen wrote:Needs el34s stat, trust me.
I gotta try this. Can I just throw any matched set in, or do I have to buy a set of Mesa tubes that are spec'd for the Rectifier?
I don't think it will hurt the amp or tubes because mesas are cold biased. Might not sound as good as nice matched set, but it can't hurt much AFAIK
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 6:10 pm
by magh8
nice HNRD
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 6:19 pm
by Rampage
I adore checkerboard grille cloth. Love the rig, bro.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 6:42 pm
by madrigal77
HNRD!!! Not a fan of Rectos, but I REALLY want to try those Creambacks.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 6:59 pm
by Dickarms
i wish i could parlay my roadcased 412 into two 212s.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 7:10 pm
by Rampage
Y0UNGBL00D wrote:i wish i could parlay my roadcased 412 into two 212s.
Cut it in half with a saw and bam, two open back 2x12s.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 7:15 pm
by madrigal77
Rampage wrote:Y0UNGBL00D wrote:i wish i could parlay my roadcased 412 into two 212s.
Cut it in half with a saw and bam, two open back 2x12s.
No, use a steak knife.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 7:17 pm
by shane159
Tommy Eisen wrote:Needs el34s stat, trust me.
This!!
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 7:17 pm
by Rampage
madrigal77 wrote:Rampage wrote:Y0UNGBL00D wrote:i wish i could parlay my roadcased 412 into two 212s.
Cut it in half with a saw and bam, two open back 2x12s.
No, use a steak knife.
No way man. A saw gives you a rougher tone and a butter knife with smooth the tone. No room for the steak knife.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 7:24 pm
by JerEvil
I may try EL34's at some point. Want to get the real "lay of the land" first before dicking with it too much. I am very impressed with how good it sounds with the 2x12's.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 7:26 pm
by madrigal77
Rampage wrote:madrigal77 wrote:Rampage wrote:Y0UNGBL00D wrote:i wish i could parlay my roadcased 412 into two 212s.
Cut it in half with a saw and bam, two open back 2x12s.
No, use a steak knife.
No way man. A saw gives you a rougher tone and a butter knife with smooth the tone. No room for the steak knife.
I can't believe it's not butter
http://www.youtube.com/watch?v=xszIaNpYILY
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 7:28 pm
by SuperFlyinMonke
My post seems to have liberated itself from your thread.
Have another.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 7:47 pm
by JerEvil
SuperFlyinMonke wrote:My post seems to have liberated itself from your thread.
Have another.
I love your avatar! LOL!
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 7:49 pm
by Dickarms
fucking bast avatar
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 7:49 pm
by JerEvil
madrigal77 wrote:HNRD!!! Not a fan of Rectos, but I REALLY want to try those Creambacks.
Love these speakers.
I need some Tuki covers for the cabs though, or road cases. I am not a fan of "mojo'd" equipment.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 8:07 pm
by SuperFlyinMonke
JerEvil wrote:SuperFlyinMonke wrote:My post seems to have liberated itself from your thread.
Have another.
I love your avatar! LOL!
Thanks. It was between that one and this one:

Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 8:10 pm
by ZEEGLER
SuperFlyinMonke wrote:JerEvil wrote:SuperFlyinMonke wrote:My post seems to have liberated itself from your thread.
Have another.
I love your avatar! LOL!
Thanks. It was between that one and this one:


Both are awesome.
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 8:50 pm
by Chops Malone
HNRD! Sweet looking rig!
Creambacks FTMFW!
Re: New Rig Day!!! Mesa/Splawn Content
Posted: Wed Jan 30, 2013 9:41 pm
by JerEvil
Chops Malone wrote:HNRD! Sweet looking rig!
Creambacks FTMFW!
Thanks mang!